QMI DPF cleaner – Applied after removal

Description

QMI DPF Cleaner contains water-soluble surfactants that are highly effective on diesel soot. They lift the soot from the surface so it can be rinsed out
Mix QMI DPF Cleaner with water as hot as possible (over 60°C, preferably 80°C) to make approximately 1 liter of ready-mixed solution. Seal one end of the filter. First fill it 2/3 full and shake the filter well for 30 seconds, then fill it completely with QMI DPF Cleaner. Let the filter stand for approximately 30 minutes so all the soot loosens from the filter. After 15 min., drain out approximately 20% of the liquid and shake the filter well for 1 minute. Fill the filter with hot water and let it stand for another 15 min. Then drain out 20% of the liquid and shake the filter well for 1 min. When done, place the filter under a tap or use a hose with good pressure and hot water. The filter should be rinsed until the water runs clear. Dry the filter with compressed air, or let it stand for a while so all the water drains out.

• 0.320 liters