QMI EGR Cleaner – Spray through the air intake

Applied through the air intake. Can be used together with EGR cleaner for fuel.

QMI EGR Cleaner will clean the entire combustion system before the system becomes 100% blocked. Should be used as soon as you notice reduced engine performance, abnormal idle, or increased fuel consumption. It will be beneficial to perform this cleaning once a year or every 10,000 km. When QMI Fuel Improver is used, this can be done every 20,000 km.
QMI EGR Cleaner is mixed with water as hot as possible (over 60 degrees, preferably 80), so you get approximately 1 liter of ready-mixed solution. Bring the engine up to normal operating temperature. Run the engine at approximately 1200-1500 rpm. Remove the air filter or the hose before the turbo or throttle body. Spray into the air system with a low-pressure sprayer that atomizes the liquid. Spray in some product first, turn off the engine, and let it work for 1 minute. Start the engine and then spray the rest of the QMI EGR Cleaner into the air intake. Finally, rinse with 1/2 liter of clean hot water,
(60-80 degrees) while the engine runs at approximately 1200-1500 rpm.
For every 1% increase in turbo efficiency, you reduce fuel consumption by 0.6%

• 0.320 liters